CS-060: ROCKET ENGINE FEED CYCLES AND COOLING TECHNIQUES IN FLOWNEX
This case study details the investigation conducted by UKZN’s Aerospace Research Institute into the development of a Commercial Launch Vehicle (CLV) for South Africa, utilizing Flownex to model various propellant feed cycles and cooling techniques in order to enhance rocket engine performance and optimize payload capacity for satellite launches.
Share This:
Share This:
More Case Studies
You might also be interested in these CASE STUDIES
CS-045: MAINTENANCE EFFECTIVENESS COMPARISON FOR A HALF STATION SHUTDOWN OUTAGE
This case study demonstrates how Flownex® can be used in evaluating the effectiveness of the maintenance work conducted during a half station shutdown outage by characterising a unit
CS-044: Fouling Factors in Flownex Heat Transfer Models
This case study demonstrates the implementation of two methods to account for thermal fouling factors in heat transfer piping and tubing…
CS-043: EXTERNAL HEAT TRANSFER PIPE
This case study demonstrates the implementation of a compound element with external surface heat transfer to or from an external fluid. The heat transfer …
CS-042: THE SIZING OF PRESSURE CONTROL AND PRESSURE SAFETY VALVES INCLUDING REACTION FORCE CALCULATION
This case study demonstrates the use of Flownex® to size properly performing pressure control valves for typical plant operation and to size and…
CS-041: FLOW MEASUREMENT ORIFICES PLATE SIZING AND UNCERTAINTY ANALYSIS
This case study demonstrates the use of some of Flownex’s power features – the Designer and the Sensitivity Analysis capability – during the design…
CS-040: Three-Shaft, Pre- and Inter-Cooled Recuperative Brayton Cycle
This case study highlights Flownex’s capability to design, simulate, and validate complex thermodynamic cycles efficiently, as demonstrated in the PBMM project, achieving rapid…