CS-031: COMBINED CYCLE POWER PLANT
This case study demonstrates the modeling of a Combined Cycle (CC) power plant of a High Temperature Gas-Cooled Reactor (HTGR). The nuclear reactor is not modeled in detail as the focus of this case study is not on the reactor but on the CC Power Conversion Unit (PCU).
Share This:
Share This:
More Case Studies
You might also be interested in these CASE STUDIES
CS-053: RECOVERING GENERATION LOSSES DUE TO FAULTY AIR HEATER OPERATION
This case study highlights how Flownex helped detect a fault in a power plant’s Draught Group, improving generation load by 5% after correction. By comparing the Flownex model
CS-052: A SIMPLE BARE TUBE CROSS FLOW RECUPERATOR FLOWNEX MODEL
This case study demonstrates the use of Flownex® to model simple recuperators using bare tubes in cross flow.
CS-051: PRESSURE PIPING THICKNESS AND FLANGE RATING CALCULATION
This case study demonstrates the use of a script and a Generic 4D chart to enable Flownex® to calculate standards-compliant wall thicknesses and…
CS-050: FIRED HEATER DESIGN
This case study demonstrates the implementation of an API 560 fired heater compound component in Flownex. It also shows how Flownex® has been used during the process design
CS-049: ECONOMIC PIPE SIZING USING THE GENERAUX EQUATION
This case study investigates a pipe sizing method based on an implementation of the Generaux Equation. This method aims to determine the optimum pipe size by…
CS-048: NATURAL GAS COMBUSTION MODELLING
This case study demonstrates the use of Flownex® to model and analyse a natural gas combustion process. Several compound components have been developed to …