CS-055: COMPARISON BETWEEN FLOWNEX SE AND 3-D CFD FOR SECONDARY FLOW MODELLING IN TURBOMACHINERY
This case study demonstrates the capability of using Flownex® SE as a preliminary design tool for secondary flow analysis before using detailed and computationally expensive 3-D CFD analysis. 3-D CFD Results, obtained from a CFM56-5C turbo machine secondary flow model, is compared to Flownex® SE’s results. The study was conducted with Lufthansa in order to evaluate Flownex’s secondary flow modelling capabilities.
Share This:
Share This:
More Case Studies
You might also be interested in these CASE STUDIES
CS-073: Transient Simulation of a Two-Stage Air Cycle Chiller
This case study demonstrates the transient operation of a two-stage Air Cycle Chiller using Flownex SE to model the closed-loop air system with compressors and a turbine, supporting
CS-071: Control Optimization with Flownex-LabVIEW Integration
This case study shows how integrating Flownex with LabVIEW enabled control system design on a simulated plant, removing the need for live start-ups and shutdowns to tune parameters.
CS-070: Quantifying the Effect of Condenser Tube Foaling on Power Plant Thermal Efficiency
This case study focuses on using Flownex to assess how condenser tube foaling affects thermal efficiency and increases operational costs in a coal-fired power plant.
CS-069: Investigating a Delay in O2 Response in an Air/Fuel Gas System
This case study investigates a delay in airflow response during transient load changes in a fossil fuel power station, where Flownex SE identified that optimizing feedforward control and
CS-068: Energy and Exergy in a Brayton Cycle-Based Power Conversion Unit
This case study simulated a Brayton cycle PCU in Flownex SE under steady-state conditions, logging parameters to calculate energy and exergy, and testing fault conditions by adjusting component
CS-067: Design of Low Temperature Proton Exchange Membrane Fuel Cell System Components
This case study demonstrates the use of Flownex to model system components of a low-temperature proton-exchange membrane fuel cell (PEMFC), including the cathode-side air flow…