CS-073: Transient Simulation of a Two-Stage Air Cycle Chiller
This case study demonstrates the transient operation of a two-stage Air Cycle Chiller using Flownex SE to model the closed-loop air system with compressors and a turbine, supporting applications like crust freezing of pre-baked foods.
Share This:
Share This:
More Case Studies
You might also be interested in these CASE STUDIES
CS-089: Simulating Tailings Transfer Upgrades
This case study describes how Flownex was used to model axial turbines stage-by-stage using a nozzle-based approach that reproduces turbine behavior accurately even when limited geometric data is
CS-082: Accurate Stage by Stage Axial Turbine Modelling with Minimal Geometry
This case study describes how Flownex was used to model axial turbines stage-by-stage using a nozzle-based approach that reproduces turbine behavior accurately even when limited geometric data is
CS-080:Predicting Combustor Wall Temperatures Using Thermal Fluid Network Modelling
This case study shows how Flownex thermal-fluid network model was used to predict the temperature distribution along the conical bluff body of an academic combustor. The model is
CS-081: Exhaust Gas Recirculation on Gas-Turbine Engine
This case study shows how Flownex was used to evaluate and optimize condensate extraction pump (CEP) flow control at a 4100 MW coal-fired power station. The plant originally
CS-078: Emergency Vent Flare Ice Build-Up Estimation
This case study shows how Flownex was used to evaluate and optimize condensate extraction pump (CEP) flow control at a 4100 MW coal-fired power station. The plant originally
CS-077: Optimization of condensate extraction pump’s flow control
This case study shows how Flownex was used to evaluate and optimize condensate extraction pump (CEP) flow control at a 4100 MW coal-fired power station. The plant originally