CS-037: INSULATION FLOW BALANCING
This case study investigates the balancing of forced flow through a perforated flow distribution manifold situated between the thermal insulation and the bottom of a cylindrical test cavity that forms part of a highly specialized experimental facility. The purpose of the insulation and manifold is to adequately insulate the very high temperatures within the test section while still allowing forced flow of gas to enter at the bottom of the test cavity.
Share This:
Share This:
More Case Studies
You might also be interested in these CASE STUDIES
CS-052: A SIMPLE BARE TUBE CROSS FLOW RECUPERATOR FLOWNEX MODEL
This case study demonstrates the use of Flownex® to model simple recuperators using bare tubes in cross flow.
CS-051: PRESSURE PIPING THICKNESS AND FLANGE RATING CALCULATION
This case study demonstrates the use of a script and a Generic 4D chart to enable Flownex® to calculate standards-compliant wall thicknesses and…
CS-050: FIRED HEATER DESIGN
This case study demonstrates the implementation of an API 560 fired heater compound component in Flownex. It also shows how Flownex® has been used during the process design
CS-049: ECONOMIC PIPE SIZING USING THE GENERAUX EQUATION
This case study investigates a pipe sizing method based on an implementation of the Generaux Equation. This method aims to determine the optimum pipe size by…
CS-048: NATURAL GAS COMBUSTION MODELLING
This case study demonstrates the use of Flownex® to model and analyse a natural gas combustion process. Several compound components have been developed to …
CS-047: COALESCING FILTER SIZING AND LIFE CYCLE ANALYSIS USING RATED AND SPECIFIED PRESSURE LOSS COMPONENTS
This case study discusses the sizing of a coalescer filter and demonstrates its fouling life cycle analysis using a Flownex® model which implements two new pressure loss components: