CS-044: Fouling Factors in Flownex Heat Transfer Models
This case study demonstrates the implementation of two methods to account for thermal fouling factors in heat transfer piping and tubing in a simple way.
Share This:
Share This:
More Case Studies
You might also be interested in these CASE STUDIES
CS-056: Using Flownex as a Tool to Develop New Engineering Methods and Correlations for Steam Turbine Performance Prediction
This case study demonstrates the ability of Flownex to be used as a tool to develop, test and implement new correlations and methods used in the prediction of
CS-055: COMPARISON BETWEEN FLOWNEX SE AND 3-D CFD FOR SECONDARY FLOW MODELLING IN TURBOMACHINERY
This case study demonstrates the capability of using Flownex® SE as a preliminary design tool for secondary flow analysis before using detailed and computationally expensive 3-D CFD analysis.
CS-054: Boiler Steam Flow Distribution
This case study used Flownex to investigate flow distribution in a new-generation John Thompson MicroGen Boiler. Steam circulation, vital for efficient production and tube longevity, was assessed in
CS-053: RECOVERING GENERATION LOSSES DUE TO FAULTY AIR HEATER OPERATION
This case study highlights how Flownex helped detect a fault in a power plant’s Draught Group, improving generation load by 5% after correction. By comparing the Flownex model
CS-052: A SIMPLE BARE TUBE CROSS FLOW RECUPERATOR FLOWNEX MODEL
This case study demonstrates the use of Flownex® to model simple recuperators using bare tubes in cross flow.
CS-051: PRESSURE PIPING THICKNESS AND FLANGE RATING CALCULATION
This case study demonstrates the use of a script and a Generic 4D chart to enable Flownex® to calculate standards-compliant wall thicknesses and…