EXTERNAL HEAT TRANSFER PIPE
This case study demonstrates the implementation of a compound element with external surface heat transfer to or from an external fluid. The heat transfer includes both convection and radiation and the convection may be specified as natural (free) or forced.
Share This:
Share This:
More Case Studies
You might also be interested in these CASE STUDIES
RECUPERATOR CROSS FLOW BARE TUBE BUNDLE
This case study demonstrates the use of Flownex® to model simple recuperators using bare tubes in cross flow.
FOULING FACTORS IN FLOWNEX® HEAT TRANSFER MODELS
This case study demonstrates the implementation of two methods to account for thermal fouling factors in heat transfer piping and tubing in a…
PSV SIZING AND REACTION FORCE MODELLING
This case study demonstrates the use of Flownex® to size properly performing pressure control valves for typical plant operation and to size and…
FLOW MEASUREMENT ORIFICES PLATE SIZING AND UNCERTAINTY ANALYSIS
This case study demonstrates the use of some of Flownex’s power features – the Designer and the Sensitivity Analysis capability – during the design…
NATURAL DRAFT STACK
This case study demonstrates the use of Flownex® to model a natural draft exhaust stack such as those typically used in natural gas…
GAS FIRED HEATER INSULATED PIPE
A client in the petrochemical industry sought help with regards to a fired heater employed on a plant. The client wished to perform thermal…