CS-047: COALESCING FILTER SIZING AND LIFE CYCLE ANALYSIS USING RATED AND SPECIFIED PRESSURE LOSS COMPONENTS
This case study discusses the sizing of a coalescer filter and demonstrates its fouling life cycle analysis using a Flownex® model which implements two new pressure loss components: a rated pressure loss component and a specified pressure loss component.
Share This:
Share This:
More Case Studies
You might also be interested in these CASE STUDIES
CS-057: Integrated Systems Modeling for a CO2-Emissions Free Alkaline Water Electrolysis Cycle in Flownex SE
This case study used Flownex to model the interactions within electrolyte loops and gas systems for McPhy Energy Germany GmbH. The model assessed piping…
CS-056: Using Flownex as a Tool to Develop New Engineering Methods and Correlations for Steam Turbine Performance Prediction
This case study demonstrates the ability of Flownex to be used as a tool to develop, test and implement new correlations and methods used in the prediction of
CS-055: COMPARISON BETWEEN FLOWNEX SE AND 3-D CFD FOR SECONDARY FLOW MODELLING IN TURBOMACHINERY
This case study demonstrates the capability of using Flownex® SE as a preliminary design tool for secondary flow analysis before using detailed and computationally expensive 3-D CFD analysis.
CS-054: Boiler Steam Flow Distribution
This case study used Flownex to investigate flow distribution in a new-generation John Thompson MicroGen Boiler. Steam circulation, vital for efficient production and tube longevity, was assessed in
CS-053: RECOVERING GENERATION LOSSES DUE TO FAULTY AIR HEATER OPERATION
This case study highlights how Flownex helped detect a fault in a power plant’s Draught Group, improving generation load by 5% after correction. By comparing the Flownex model
CS-052: A SIMPLE BARE TUBE CROSS FLOW RECUPERATOR FLOWNEX MODEL
This case study demonstrates the use of Flownex® to model simple recuperators using bare tubes in cross flow.