CS-046: BASIC IMMERSION FIRETUBE MODEL
This case study demonstrates the implementation of a basic immersion fire-tube model in Flownex and presents natural draft and forced draft examples.
Share This:
Share This:
More Case Studies
You might also be interested in these CASE STUDIES
CS-052: A SIMPLE BARE TUBE CROSS FLOW RECUPERATOR FLOWNEX MODEL
This case study demonstrates the use of Flownex® to model simple recuperators using bare tubes in cross flow.
CS-051: PRESSURE PIPING THICKNESS AND FLANGE RATING CALCULATION
This case study demonstrates the use of a script and a Generic 4D chart to enable Flownex® to calculate standards-compliant wall thicknesses and…
CS-050: FIRED HEATER DESIGN
This case study demonstrates the implementation of an API 560 fired heater compound component in Flownex. It also shows how Flownex® has been used during the process design
CS-049: ECONOMIC PIPE SIZING USING THE GENERAUX EQUATION
This case study investigates a pipe sizing method based on an implementation of the Generaux Equation. This method aims to determine the optimum pipe size by…
CS-048: NATURAL GAS COMBUSTION MODELLING
This case study demonstrates the use of Flownex® to model and analyse a natural gas combustion process. Several compound components have been developed to …
CS-047: COALESCING FILTER SIZING AND LIFE CYCLE ANALYSIS USING RATED AND SPECIFIED PRESSURE LOSS COMPONENTS
This case study discusses the sizing of a coalescer filter and demonstrates its fouling life cycle analysis using a Flownex® model which implements two new pressure loss components: