TURBINE PROTECTION TWO PHASE FLOW REGIME

The main challenge explored in this case study is root cause analysis of dynamically hazardous movements in the distillate lines to a plant deaerator. Flownex’s simulation optimisation tool was used to determine the preferred two phase flow regime. By using Flownex® to identify the cause it was possible to mitigate a commercial impact on the project, maintain the planned commissioning schedule and improve the existing plant design thereby also removing the safety risk of unwanted dynamic line movements.
Share This:
REQUEST FULL CASE STUDY
More Case Studies
You might also be interested in these CASE STUDIES
CHILLED WATER DISTRIBUTION
This case study demonstrates Flownex’s ability to predict the temperature rise in chilled water networks due to gravitational effects…
MINE VENTILATION
This case study demonstrates the steady-state simulation of a compressed air network used in the mining industry.
BLOW-OFF VALVES
A blow-off test to determine compressor performance during part load conditions is required at a newly built compressor plant…
COMPRESSOR OPTIMISATION
This case study reviews an AngloGold Ashanti project which facilitated a saving of 2.5 MW by using Flownex® to optimize compressor and piping…
AIR COOLING UNIT DEEP MINES
Flownex® enabled M-Tech to penetrate the market by convincing clients of the economic benefit associated with the Air Cooling Units…
CHILLER PLANT CONTROL
This case study demonstrates the control of a three stage chiller plant that cools water in a primary loop, which feeds into a secondary…